RealCast Slab Panel 48×48 Circles — Natural Grey
The Slab Panel is a large-format concrete field with a flat or circle-cast face — the poured-in-place architectural concrete read, sized for open walls. Cast in fiber-reinforced lightweight concrete, no wet trades.
The Natural Grey colourway is a raw, warm concrete grey with soft mineral variation — the closest read to unfinished poured wall.
Each box covers 64 square feet. Screws to the substrate through the built-in nailing flange — no adhesive, no wet trades. Panels lock together with a shiplap edge; cuts trim clean with a fine-tooth wood blade.
By design, colour and character vary. If needed, you can order a sample here: Natural Grey sample.
What sets it apart:
Large-format cast concrete face at panel-veneer weight — a 48×48 slab is under 40 lb; the real thing is 250+ lb and needs lift equipment. Poured-in-place look, screw-and-flange install. One quiet spec point: RealCast is cast with CSA cement rather than the standard Portland used across the field. CSA cement is shrinkage-compensating — the panels come out flatter and hold dimensional stability through the cure, so what leaves the mould matches what sits on the pallet. CSA cement production also runs up to 60% lower embodied CO₂ than Portland cement production, per the mill data sheet on file.
Good to know:
Best over a level substrate, with two people on the hang for the 48×48 — a large-format slab shows out-of-plumb from across the room. Fiber-reinforced concrete; cut wet with a respirator on. Tested to ASTM E84 — Flame Spread 0, Smoke Developed 0 (Class A results); Intertek report on request. Standard lead time is 3–4 weeks — the panel is cast when the order is placed.
Complete the wall:
- Matching corner (48-series): RealCast Slab Outside Corner — 48 Series — Natural Grey
Specifications
| Face format | 48" × 48" panel, circles surface |
|---|---|
| Panel depth | 3/4" nominal |
| Material | Fiber-reinforced lightweight concrete |
| Install | Screws to substrate; cut wet; two-person hang on the 48×48 panel |
| Fire rating | ASTM E84 — Flame Spread 0, Smoke Developed 0 (Class A results); Intertek report on request |
| Lead time | 3–4 weeks (cast when ordered) |
| Warranty | 10-year limited |
| Coverage per box | 64 sq ft |
| Box weight | 245 lb |
Add to Cart for Additional Discount Based on Total Cart Value (Excluding Tax and Freight):
- Spend Over $5k get 3% Off
- Spend Over $10k get 5% Off
- Spend Over $25k get 7% Off
- Spend Over $50k get 10% Off
- Spend Over $75k get 12% Off
- Spend Over $100k get 15% Off
Choose options